The brake in a car is used to slow down or stop the vehicle. A driver should press the brake when they need to stop (such as at a stop sign or red light) or when they need to slow down (such as when moving into a lower speed zone).
the car should slow down and eventually stop if you keep on holding it
You use the clutch to change gears or stop. Not necessary when slowing down.
If you are driving down the road and your brakes do not respond first try slowly applying the emergency brake to bring yourself to a complete stop and get your car serviced before driving again if the emergency brake also fails put the car into neutral and turn the engin off and try and coast to a safe complete stop and as earlier stated service vehicle before driving again
It can not. Generally use press brake to bend sheet metal. Press brake has 3 kinds of series. Manual press brake by foot, mechnical press brake, hydraulic press brake.
No , the brake light should come on when you press the parking brake pedal , but the ABS light should not come on
Not sure how to while you're driving, but if your parked - press in on your e-brake, turn your car off, then turn it on and your lights won't be on. To turn them back on, simply release the brake.
you should gently press the brake pedal and gently press the gas pedal, the increase friction will dry the brakes.....
Generally, brake pads should be changed between 20,000 and 180,000 miles. This depends on the brand of the brake pads, and the persons driving habits.
There should be a Tool for driving it. If there is press that tool, then press Y. You'll figure the rest out on your own!
no, you should have to press the brake to shift out of park
You will wear out your and brake, and make the engine work harder.ANS 2 You will overheat the brake and strain the engine. If you didn't smell brake overheating, you may be OK. However you should re-adjust this brake as it should have prevented the car from moving.
If you've applied your emergency brake because you were on a hill, and you notice after you start driving the brakes paddle has alot more give or they dont seem to apply correctly.Then..Put the van in reverse and press the brakes harder then normal a few times going backwards, this should readjust the braking system in your back tires. And you should notice the original amount of tension when you press on the brakes.