More than likely a small spring broke in the e-brake pedal assembly. The assembly is not designed to be taken apart and fixed. You will need to replace the assembly with a new one from the dealer or a used one from a wrecking yard.
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
the parking brake on caterpillar dump truck is spring applied and pressure released
You can adjust your parking brake by turning the parking brake adjustment bolt. The parking brake adjustment bolt is located on the parking brake pad assembly.
Remove the headlight assembly and you will have access to the parking light bulb.
The 2000 Chevrolet Impala parking brake will have an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
The 2001 Chevy Cavalier parking brake has an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
Yes, connected to the parking brake assembly is a little black lever, which when pulled will manually release the parking brake.
check the parking brake cables, any applied tension, and condition of the brake shoes
1989 Cadillac Fleetwood parking light bulb replacement: Purchase the correct replacement parking light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement parking light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
THE CAR NEEDS FRONT BRAKES............................
Remove the headlight assembly to gain access to the parking light socket/bulb.
THERE IS NO PARKING LIGHT LENSE FOR THE REAR. IT'S ONLY THE TAIL LAMP ASSEMBLY!