Yes. Power in both cases is 1.035 KW. Your meter shouldn't know the difference.
Power = E times I = (24 x 2) = 48 watts
Resistance of the circuit = (voltage across the circuit) divided by (current through the circuit)
That would depend on the power output (watts) of the circuit. Volts times the Amperage equals the Wattage of the circuit. You do not have enough information in your question. Volts is the force applied to move the electrons in the circuit, and amps are a measure of the quantity of electrons moved through the circuit over time. Thus a circuit of 415 volts and 1 ampere will deliver 415 watt-hours of power. Yet a circuit of 1 volt at 415 amps will deliver the same 415 watt-hours of power, but with less force.
Basically if you know the Voltage supply and the power used by an appliance then you use the formula for power which is Power = Volts x Amps. Rearrange so Amps (current) = Power / Volts If power was 2400 Watts and Volts was 240 the Current would be 2400 / 240 = 10 Amps
The lamps will get dimmer. In a parallel circuit, voltage is constant. Whereas, in a series circuit, amps are constant.
The equation that you are looking for is I = E/R. Amps = Volts/Resistance.
The cost is about the same using the equation Power= Voltage X Current . However , if the 115 volt electrical circuit is produced from a 230v supply though a transformer , then the transfomer incurs loses and therefore the cost is greater .
1.9 amps
P = I x V P = 22 x 220 Therefore Power consumed = 4840 Watts Or 4.84kW
Power = E times I = (24 x 2) = 48 watts
Amps is a measure of current flowing in a circuit. Volt-Amps or (VA) is a measure of power and is equivalent to wattage for a pure resistive load.
The circuit would be protected up to 8 amps before the breaker would trip. Any more that 8 amps and the circuit would open and shut the circuit off.
6 amps.
200 amps
Answer: To determine the amperage in a circuit. Notes: Power (in watts) = Volts * Amps 16.4 KVA = 480V * Amps 16400 / 480 = Amps ~34.2 = Amps
80% of the rated circuit. 10 amp circuit is 8 amps, 20 amp circuit is 16 amps, etc.
.9 watts.