If your at home this could take some fine tuning but iif in an appartment try throttling down on the valve while running water and see if it is just cause by excessive pressure.
by peeing and pooin in it.
A toliet uses 7 to 8 lites per flush!
Modern toilets are are all adapted to a 13 litre flush. Some also have a button giving the option of a 6 litre flush too.
Either the flapper is letting water through or you need to replace your flush valve or there is something stuck between the stop and the flush valve.
Take shorter showers and don't flush the toliet.
5 gallons at least for a home toliet restrants seem to take 3 gallons that's why they are always are out of order who cares how much the water bill is put your toliet at 5 gallons there is more pressure
If your toliet is working properly, it should only have water in it.
look in the water tank and see if the water in there is brown too...it might be rust in the pipes
I believe that one cause would be air in the lines. A plumbing system must have a vent in order to drain properly, if the vent is of improper size or improperly installed the drain will gurgle much like a gallon of water turned upside down sucks air in through the water. In metal pipes this sound will echo and create a rattleing sound, moreso than plastic pipes.
No! Not all of the ocean are salt or have salt. Salt is a mineral to the poors along time ago. The ocean water comes from the toliet that you flush. Did you know that? The water you flush goes to the oceans, that's is why it is salty. The saltness can help the animals to actually survie!
You find out why it won't flush . If it has water in the tank, then the problem is the 'flapper'. Possibly the flapper is not coming up, these are cheap and easy to replace.
In order to clear a blocked water supply line, simply clear the blockage by flushing the pipes. To flush the pipes, pour some drain cleaner into the affected area and then rinse out with hose water.