smps power connector it has THREE pin connector .i replaced new one this.
if u wanna help Pl contact +91-9490136112
--------------------------------------------------------------------------Mr.Mahesh
the printer was invented in 1999
Once sent to the printer with a Print command Word no longer has control over the printing. You will have to look at the print queue and stop it and remove it from that. (I have a lot of very bad experience with this function in networks and at home...)
Immediately after printing, the ink is wet.
Printing a file requires one to connect a computer to a printer. With the appropriate drivers of the printer installed, open the file and choose the print command. The printer will print the file so long as there is paper.
give the print command by clt+p or from file >> Print.. in print menu, either select print current page or select a page no from page no section.. dont give printing from the print icon in ms-office as it will print the whole document..
A printer may be used by anyone. A personal computer is typically connected to the printer. The drivers for the printer must be installed on the computer. The user must give a print command.
Yes, but this will give whatever you are printing a textured effect. If you don't mind that, then print away!
HVPS, give the printer enough charge to put toner on the paper for you to read. without the charge, no print or faded. re: your regular black printer.
Using Word, you choose Envelopes and Labels from the Tools menu. Type the address into the box. Then, look closely at your printer to find out how to place the envelope so it will get printed. Usually, you will use the bypass feeder and the print function of your software will do the rest.
After sharing the printer, add the users or groups that you want to have access to the printer, along with 'print' ability, such as 'create document' authority.
If you don't give any details of whats wrong with it then we can't help you
1. Check if a printer is powered on. 2. Check if a printer is properly connected to a computer. 3. Check if a printer has its toners/inks. 4. Check if paper is in printer's tray. 5. Check if printer's software doesn't show any problems.