Broken sewer line /stoppage
You go to the toilet that is is close to the power room and press square 3 times.( the toilet is the one at the left ) when you press square wit til you hear it flush completly.if you dont know where the toilet is it is in front of the stg-44 to the left
go in the bathroom and jump on the red button on the blowdrier then jump in front of it. then knock the soap off the holder turnon the water and swim out.
Not sure what you are asking. All toilets have a bowl. You generally push the handle down on the front or side of the tank. If you are asking how to flush with a bowl of water, it takes a bucket of at least 2 gallon. Just pour it into the bowl about as fast as it will take it. At some point, there will be enough water in the bowl to flush it.
Depends on the make of flush valve. Some have a screw under the cap that you turn clockwise to increase, counter-clockwise to decrease the pressure. Best thing to do is change the diaphragm and go from there.
I can be but the toilet needs to have 24" in front of it to be legal. Plus you cannot tie your shower drain in the the horizontal branch of the toilet.
So the front of them is flush with drywall is the correct way.
21"
According to the 2006 International Plumbing Code, the following are the minimum dimentions for setting a toilet: From rear wall to center of drain line = 12 1/2 inches min. (General Standard Not Code) From side wall or side cabinet to center of drain or centerline of toilet = 15 inches min. From front of toilet to front wall or cabinet = 21 inches min. From front of toilet to Toilet dispenser = 7 to 9 inches. I hope you find this usefull. Terry
From the front of your vagina to the back.
24"
You Can't. But i recommend you either put a bucket in front of them or you drag the in front of a toilet.
The dash has to be removed. Once the dash is out, the top of the heater case comes off to gain access to the core.