0
When you start your envoy you get message low oil pressure stop engine?
Wiki User
∙ 13y ago
Then stop the engine and have it inspected by a professional.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
I have a Chrysler sebring combertivle 2.5 v6 the engine rotates but will not start?
engine have spark and fuel pressure and still will not start
Engine will start then stop running 1997 eagle talon?
Check for proper fuel pressure in the 1997 Talon. The engine appears to be starving for fuel and only has enough pressure to start.
Dodge sprinter will not start message error start?
Start error means that the "chipped" key message is not getting to the proper computers. You need a scan tool to check codes in the engine, skim, cluster, etc.
How you get pressure back after changing fuel filter?
Just start the engine.
Why does the oil light come on before you crank the motor?
an oil light is designed to come on when there is NO oil pressure or LITTLE oil pressure. that said, when your oil light is on before you start your engine there is NO oil pressure to turn it off until you start the engine.
Why rail pressure goes high when engine is on?
Engines need higher fuel pressure to start than they do to run.
What is correct fuel pressure on a 1998 Lincoln town car with a 4.6 key on engine off?
For most vehicles, the fuel pump only turns on briefly when you try to start the engine. If the engine doesn't start, the pump turns off. You need to test the fuel pressure with the engine running.
Your gmc envoy won't start and key is locked in ignition?
My 2002 GMC Envoy won't start,no lights come on when trying to jump start the battery. And my key won't remove from the ignition. What's should i do?
Is there any problem when you turn your self start again n again when your engine in start condition?
If the engine is running, you will destroy the starter and possibly the flywheel/pressure plate.
Caterpillar 3306 oil pressure problem?
I have no number on panel when icon checks oil pressure . please guide me what is problem
How do you fix a Start Error message on a ML320 It will not start?
A couple things could be wrong...... first thing you always want to try is another key, (if you have one) then if the car starts and no error message you know you have a bad key. if you still have a no start and error message it might be the transponder coil located on the ignition switch. could also be a bad imobilizer. Question.....does the engine start and then die right away? Or does the engine not start at all? a bad transponder coil will usually cause the start then die complaint. good luck!
Why does your 2001 Envoy needles bounce but wont start?
Weak battery
