its down in front on passenger side there will be one wire going to it
left cyl head
It's at the very back of the block, top-center, under the intake manifold.
What size motor?
The oill sending unit is almost always on the back of the motor by the fire wall.
middle of the motor drivers side
The oil sending unit on a 92 ranger 2.3 engine is on the drivers side of the motor. It is on the back of the head.
A couple of things that you need to first check. Is power present to the fan motor. If not look for the temp sending unit. check for power to the the sending unit. if there is 12v power present there then bypass the sending unit by crossing the terminals. if the motor turns on then replace the sending unit. If there is no power to the send unit, obtain a wiring schematic and trace the power source to the failed component
Are you talking about a sending unit for the fuel system, If so, yes its in the tank Are you talking about a sending unit for the fuel system, If so, yes its in the tank
by the the oil filter
top front of the motor
the 3800 oil sending unit should be on the side of the block. It is screwed in right beside of the oil filter.
Where is the oil pressure sending unit on a 1995 F150 truck with a 302 motor at