It's on the transmission, two 14mm bolts.
The starter is located on the driver side below the intake all the way in the back. hooked up with two bolts to the transmission.
The starter on a 1998 Toyota 4runner is held located on the transmission housing. The starter is held on by 2 bolts which mount it directly it the engine. Remove the two bolts to replace the starter.
The starter is located on the driver side of the under the intake maniford it has two bolts 14mm to remove it.
The 1994 Toyota pickup truck starter mounting bolts can be found on the head of the starter. There will be three mounting bolts.
follow the top hose from the radiator to the engine this will terminate in an aluminum housing secured with two/three bolts the thermostat will be in this housing.
Replacing a starter on a 1989 Toyota Corolla is not very difficult to do. The wires will need to be disconnected from the old starter and labeled or taped. The starter is held in place by two bolts, unscrew the bolts and remove the old starter. Then replace with the new starter.
I believe the correct answer is 2 bolts
The starter is bolted onto the transmission on the driver side. There are two bolts that holds the starter in place. The first bolt is located under the starter which is easy to get. The second bolt is located on the top of the starter which has a tight sqeeze to get to. Most mechanic will drop the transmission or loosen the transmission to get to it. With due respect, if you have small hands, you may be able to reach it.
where are the two bolts located on the starter?
The starter is located under the intake manifold. You will have to remove the intake manifold being very careful not to drop any of the bolts into an in port. The starter is fairly easy to access once the manifold is off.
remove the neg battery cable then the wires on the starter. Then take out the mounting bolts and work the starter out.
the starter is located on the bellhousing towards the passenger side