0
The fuel filter is located underneath (drivers side) of the vehicle on the inside of the frame. It is just about even with the aft of the drivers door. You will have to jack the vehicle and securely support it on jackstands in order to remove and replace the filter. Remember to relieve the fuel system pressure at the Schrader valve located on the fuel rail then disconnect the negative terminal of the battery before attempting to remove the filter. Do it in a well ventilated area away from any open flames. You will be working overhead so put a rag around the hoses before disconnecting them to keep the gas off of you. Goggles are highly recommended.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How do you replace the fuel filter on a 1999 Oldsmobile silhouette?
replace a fuel filter on a 1999 Oldsmobile Silhouette
Where is the fuel pump on a 2003 oldsmobile silhouette?
In the fuel tank. You have to drop the tank to access it.
Where is the fuel pump on a 2003 Oldsmobile silhouette located?
In the fuel tank. You have to drop the tank to access it.
What is the fuel tank capacity for 2000 Oldsmobile Silhouette van?
25 gallons
How many fuel filters does your 2003 Oldsmobile alero have?
It has one.
Where is the fuel shut off in a 2000 Oldsmobile Silhouette?
GM vehicles are not equipped with a fuel pump inertia switch.
Where is fuel filter located on 1999 olds silhouette?
Most GM fuel filters are under or slightly behind the driver.
How do you change a fuel pump in a 94 Oldsmobile Silhouette?
On just about all GM vehicles, you need to pull the fuel tank to get to the fuel pump.
Is the fuel line connected to the master cylinder on a 1998 Oldsmobile silhouette?
No. They are two entirely different systems.
Where is the fuel pump on a 1995 Oldsmobile 98?
Inside the fuel tank.
Where is the fuel filter on an 98 Oldsmobile?
Fuel filters in most GM vehicles are under the vehicle, behind the driver.
What causes no power to fuel pump on a 99 Oldsmobile silhouette?
Blown fuel pump fuse, or defective fuel pump relay. This is assuming all wiring is good.
