0
What else can I help you with?
Can you tighten the head bolts On a 91 prelude without pullng the cams?
no as there are head bolts directly under the cam i belive
Where is the thermostat located on a 1992 Honda Prelude Si H23?
It is located on the top radiator line where it connects to the block. There should be 2 bolts that secure it to the block.
How do you replace a 1991 Honda Prelude head gasket?
To replace the head gasket on a 1991 Honda Prelude, first, disconnect the battery and drain the coolant. Then, remove the intake and exhaust manifolds, along with the cylinder head bolts, to take the cylinder head off. Clean the mating surfaces thoroughly, install the new head gasket, and reassemble the components in the reverse order, ensuring to torque the bolts to the specified settings. Finally, refill the coolant and check for leaks before starting the engine.
Can 1995 prelude 2.3l head fit in a 92 prelude?
Yes
What are the torque specs for 1989 Honda Prelude B20 2.0si engine bolts?
wich bolts do you need the specs on
Where is the computer located on a Honda Prelude?
I have an 88 Honda prelude and my computer is located under the carpet on the passenger side.
Diagram of thermostat location 1998 jeep?
it is located in the top hose where it bolts to the head 4.0l
Where is the fuel pump relay located in a 1988 Honda prelude?
where is the fuel pump cutoff relay located in a honda 88 prelude?
What is the head bolt torque on a 1988 honda prelude doch?
You will need to consult with a manual (or ask a Honda-certified mechanic) on the sequencing of tightening the bolts on a cylinder head, but start with about 22 lb-ft/3.0 kg-m when you tighten all the bolts initially, then fully tighten them to 49 lb-ft/6.8 kg-m. Remember to keep the bolts lubricated before you do this...use engine oil or similar.
Location of ignition coil on a 2002 Pontiac Montana?
The coil is located at the back of the intake manifold. There are two bolts that hold it to the intake, and two bolts that hold it to the head.
What do you do if you brake the head bolts?
on a acura integra type r if you brake the head bolts what do you do on a acura integra type r if you brake the head bolts what do you do
Where is the PCV valve on a 99 prelude?
The PCV Valve is located on the top right of the engine, which connects a tube from the intake manifold to the head of the engine. IT IS NOT THE ONE THAT CONNECTS TO YOUR INTAKE!!! ..
