0
Add your answer:
Earn +20 pts
Can you put a 1987 Honda Prelude 2.0 SI motor in a 1988 Honda Prelude?
Yes you can I have 1988 Honda prelude with the 2.0L in it.
Where is the oxygen sensor located on a 1988 Honda prelude fuel injected?
The oxygen sensor on a 1988 Honda Prelude fuel injected engine is on the exhaust manifold. It screws directly onto the front of the exhaust manifold.
Where is the oil filter located on a 1988 Honda Prelude SI?
the oil filter is located on the back side of the block in the middle
What is a normal idle for a 1988 prelude?
my 1988 4ws Honda prelude idles low at 600 rpm
Does a 1988 Honda Prelude have a vehicle speed sensor?
Yes, the 1988 and 1989 Honda Prelude has a VSS that is a cable sending unit that connects to the gauge cluster in the dash.
How do you remove the console of a 1989 Honda Prelude?
None of the dashboard lights work on my 1988 Prelude. Why?
Where is the main relay switch located on a 1988 Honda Prelude?
Location of the Main Relay SwitchThe main relay is located under the drivers side dash panel, behind the fuse panel. There are four Phillips head screws holding the dash panel on and one 10 mm screw holding the main relay in. The main relay is usually marked MITSUBA or something similar and is about 3" X 1.5"
The location of the spark plugs on a 1988 Honda Prelude?
Screwed into the head.
Where is the horn on a 1988 Honda prelude?
under left hand head light
Do all 1988 Honda Prelude 2.0 Si's have sunroofs?
Yes. All Preludes do.
How do you install a dual timing belt on a 1988 Honda Prelude?
The 88 Prelude does not use a dual timing belt. It has a single timing belt
Why is your 1988 Honda prelude si hard to start when sitting in the heat of the day?
It is your main relay. Its under your dashboard on the driver side. it is hard to see. its on the left side of the fuse box you might have to unscrew it.
