If this engine is the same as mine (mine is a vortec 4 cyl.), you have to remove the bolts that hold the large plastic piece on the top of the engine (the one that says Vortec on it). This will require removing the hose clamps and hoses. Once that is removed, you should see some square blocks with wires going to them. These are what I call coil packs, not sure of the technical name. These are held with one bolt each. Remove this bolt and the wire going to the coil pack and pull up. The spark plugs are underneath. Mine used a 5/8" spark plug socket to remove the plugs.
The spark plugs are located under each of the ignition coil modules on 2008 Chevy Colorado. It is necessary to remove the coils and related wiring to access and replace them.
The Spark Plugs are located under the resonator box in the center of the engine (its the rectangular black box on top of the engine)
Yes
There right on top of the motor
with tools
in the trunk
Screwed into the head.
take off the plastic cover and under where the silver cover on the engine says ecotech is where the spark plugs are located
Torque settings are specific with spark plugs. I'd recommend you go to an auto parts store, and get a Haynes or Chilton book for your vehicle.
Follow the spark plug wires, they will lead you right to them.
The spark plugs for any Chevy cobalt are located under the 4 wires that go into the center top of the motor, each one is evenly spread out into a line. Unplug those wires and below them are the spark plugs
how do i change the spark plugs on a Chevy silverado 1500