Want this question answered?
The pulleys have marks that line up with marks on the case, See link below for complete step by step how to with pictures.
if its fuel injected take it to the nearest dealer
1999 king quad 300
There are no timing marks on the water pump.the only timing marks are on the crankshaft and camshaft gears.And if you're working on a quad-four engine as I suspect you are,you will need to line up the holes in the cam sprockets with the holes in the block and insert pins to hold them in place.The correct size drill bits will work good for this if you don't have the special GM tool.
chain
where is the location of the vin number on a 250 king quad
Crankshaft gear timing mark up, camshaft timing holes over the small holes behind the pully, they should be at 6 o'clock. facing straight down. if your over 100k make sure to buy a new chain and tensioner.
Timing chain diagram or how to set it
Check out the tech section at NYROC.COM for all things King Quad...
The timing is ground in the crankshaft and not adjustable.
I might be wrong but on a Suzuki king quad the tire pressure should be 36 psi!
left side of the quad