0
What else can I help you with?
What is the factors that effect on number of tubes in shell and tube heat exchanger?
The factors that are affected by number of tubes in shell and tube heat exchanger is the rate of heat transfer and flow rate.
How do you passivate heat exchanger tubes and it is advisable.?
To passivate an exchanger gently pat the shell while whispering into a bleeder
What is the difference between double pipe heat exchanger and shell and tube heat exchanger?
double pipe heat exchanger is made if two concentric tubes one carrying cold flow and the other one carrying hot flow. but shell and tube hear exchangers are made of a shell like a vessel filled with many thin tubes to transfer heat between fluids. there are more data available at : http://scopewe.com/double-pipe-heat-exchanger-design-part-1/
What tester do you use to test an heat exchanger?
There are different types of heat exchangers. To get an answer the type of exchanger and what type of test you want to do should be stated.
What is a shell and tube condenser?
A heat exchanger with straight tubes in a shell that can normally be mechanically cleaned
How much tube could plug in heat exchanger or in percentage?
about 10% of the total number of tubes
What has the author Robert Adrian Walker written?
Robert Adrian Walker has written: 'Fouling in heat exchanger tubes'
What are the benefits of using a heat exchanger?
One major benefit of a heat exchanger is that it quickly transfers heat from one medium to another such as an air conditioning unit or a space heater.
What is an Impingement plate in an Heat Exchanger?
Impingement plates are installed on the tube side of a bundle. It is between the tubes and the inlet nozzle and serves to slow down and/or disperse the liquid as it enters the exchanger. This prolongs the life of the tubes in this area which, in turn, extends the life of the bundle.
What causes knocking sound from heat exchanger when a teledyne laars heater is heating?
The noise is coming from the heat exchanger located just above the burner tray. One or more of the heat exchanger tubes has become blocked or reduced in size from calcium buildup - - - improper adjustment of your pool's pH which can happen is a short period of time. The knocking is caused by steam or the lack of proper water flow through the exchanger tubes. Someone, and I am not mentioning names has not done their job of maintaining the pool properly. If left alone the exchanger will fail and you will have a great expense of replacing the heater. Another possibility is that the heater by-pass valve is failing. You need a qualified pool tech to advise. He can only assess the problem through a heater visual inspection --- that means disassembling the heater to look at the exchanger tubes. Sorry for your misfortune. k
What is one to one pass heat exchanger?
A one-to-one pass heat exchanger is a type of heat exchanger where both the hot and cold fluids pass through the exchanger once. This design is simpler and more compact compared to multiple pass exchangers, but may have a lower heat transfer efficiency due to the limited contact time between the fluids. It is commonly used in applications where space and cost are important factors.
What is use of past partition plate in exchanger?
The past partition in used in a heat exchanger to divert the flow of product into one side of the tubes and into another. For example, if you have a straight tube exchanger bundle with a channel head and an inlet and outlet nozzle. The partition is positioned in the channel between the two nozzles and in the center of the tube sheet. when the liquid flows into the inlet nozzle it is forced into the tubes around the partition and out the outlet nozzle. The more Past partitions you have the PASSES the liquid makes through the tubes.
