You should be able to buy the linkage bushing from any auto parts store like AutoZone, O'Riely's or Pep-boys. If they do not have it in stock, they can probably order it for you. You could also buy it online.
The linkage bushing is located under the Crowl grill. Remove wipers and grill.
95
Advanced Auto Sells a bushing kit
Broken linkage or bushing in the wiper system.
how you change the wiper linkage bushing requires you to take off the wiper blades and vent off the top off the dak there should be about 8-9 screws maybe less, then when the vent is removed, there will be a plastic vent with plastic clips, simply lift up one edge of vent it should just pop out the do the same with other clip, when vent is lifted up unplug the rubber tubing from spray nozzle then repeat with other tube, when plastic vent is removed you should be able to see the wiper linkage crank and wiper arms there you should see the bushing simply pull the wiper linkage and remove the bushing and replace.
Wiper linkage broken or disconnected? Bad wiper transmission? Wiper Bushing. I have an '03. The wipers are crap! One goes out, once fixed-BAM...other one stops!!
Because rust slowly begins to grow on the wiper motor ball that is related to the linkage and that corrosion disintegrates the plastic female part that holds on to the motor and it causes to remove the linkage off, my suggestion, buy a new motor and linkage, it will save lots of hassle and time!
Email me for the diagram for the locations of the wiper components. dwillman@canada.com
You have to remove the linkage from the wiper motor.
The 2000 Mazda Protege wiper blade sizes are 21" drivers and 19" passenger side wiper blades. See Sources and Related Links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
Good question. I guess you would have to take it apart to find out.
i put a new windshield wiper moter in and the fuses are fine but my wipers still wont work