Often in the owners manual is where i found the one for my 1991 Crown vic. Hope you have your manual?
For a 1991 Ford Crown Victoria : " regular " unleaded , 87 octane
Yes, they are identical
In the gas tank.
Yes, both model years are AOD transmissions.
According to my Chilton's book : For a 1991 Ford Crown Victoria ( 5.0 / 302 and 5.8 / 351 ) With engine oil filter change ( 5.0 U.S. quarts )
10 degrees advance
The best is to buy a new one.
On a 1991 Ford Crown Victoria : Using a funnel , you add automatic transmission fluid through the ATF fluid level dipstick ( in the engine compartment , near the firewall , on the passenger side of the engine )
In a 1991 Ford LTD Crown Victoria ( 5.0 / 302 and 5.8 / 351 ) Follow the top radiator hose from the radiator , it connects to a housing on the front of the intake manifold . The engine cooling thermostat is inside the housing
oN THE 91 FORD CROWN VICTORIA YOU WILL LOCATE THE SPEED SENSOR ON THE DRIVERS SIDE OF THE TRANSMISSION ON THE TAIL SHAFT.
Probably computer controlled and not adjustable
In order to replace the oil pan on the Crown Victoria you have to remove the engine from the car. After the motor has been removed then you remove the bolts holding on the oil pan and it can be replaced.
how to replace shifter tube
No, they are not the same. The body style changed in 1992.
The Ford Crown Victoria was manufactured by The Ford Motor Company from 1955 to 1956 and again from 1991 to 2011. It is a rear wheel drive sedan and has been used as a Police Interceptor from 1998 to 2012.
According to my Chilton's Auto Repair Manual : For the 1991 Ford Crown Victoria : With the 5.0 litre / 302 cubic inch V8 ( 18.0 U.S. gallons ) With the 5.8 litre / 351 cubic inch V8 ( 20.0 U.S. gallons )
What engine? V8? 18436572 for chevy 1991 silverado v8 350 diagram
According to one of Ford's websites : For a 1991 LTD Crown Victoria , 5.0 liter / 302 cubic inch V8 : ( .050 inch spark plug gap )
Ok, I have a 1991 Crown Vic, 5.8L-351Win, 2bbl, Police Model and the large sticker on the valve cover says "Firing Order 1,3,7,2,6,5,4,8". Hope that helps.
Try your local newspaper classifieds, eBay motors, Auto Trader, craigslist...
According to one of Fords websites : For a 1991 LTD Crown Victoria : The 5.0 liter / 302 cubic inch V8 spark plugs are gapped at ( .050 inch ) The 5.8 liter / 351 cubic inch V8 spark plugs are gapped at ( .044 inch )
The 1991 BMW 520 distributor Can be found on the back side of the engine. The distributor Will be on the top of the engine.
Just taking a guess........Loose chain.