Check with your local auto parts store or Sears. Some socket drive sets come with a 5/8" This should be the size of the spark plugs in your motor. use a 3/8 drive socket wrench and the 5/8 socket with a 8" extension attached. This will make changing spark plugs much easier. Good Luck!!!
They don't have spark plugs, therefore, no need for a wrench
http://www.everdrive.com/SearchResults.aspx
use the spark plug wrench and use used mirror to find the rear spark plug, you need to two person to do this, then fell the spark plug rear with your hands then apply the spark wrench to remove the old spark plug.
You will need a general screwdriver, a spark plug socket, a socket wrench and and extender, a wire brush and a silicone dielectric compound. You should find more of these tools at SEARS or your favorite car parts dealer. You will need a spark plug wrench with an extension to replace the spark plugs in a 1998 Nissan Sentra. You can find an instructional video at www.youtube.com.
You don't need a diagram to find spark plugs on this engine. Follow the plug wires and you will find the plugs.
When changing fuses it is important to have a diagram to help change the right fuse. The fuse box diagram for this car can be found in the owners manual.
18mm. But it has to be a thin wall socket. The stock tool that came with it is best if you can find one.
Tools needed: New Spark Plugs Spark Plug Wrench Socket wrench Extension (At least 2-3 inch) size 10 socket size 12 socket First thing you need to do is find out where the spark plug cover is. Once you figure that out there will probably be size 10 or/and 12 bolts honding it down. Take that off and there you will see sensors connecting to each other and holding the spark plug in the cylinders. Unplug all the sensors and pull out the circular plugs holding the spark plugs down. THey might be a little tight and hard to get out so you're going to need to give it a good tug. once you pull them out MAKE SURE YOU DONT DROP ANYTHING INTO THE CYLINDERS. You can look down into them and see the spark plugs. Get your spark plug wrench, extension, and socket wrench and stick them down in and push so that the spark plug wrench grabs them. Just simply unscrew the plugs, pull them all out, and then put the next ones in, and tighten them down. Just connect all the sensors, and put the cover back on and you're done. Pretty simple. Tools needed: New Spark Plugs Spark Plug Wrench Socket wrench Extension (At least 2-3 inch) size 10 socket size 12 socket First thing you need to do is find out where the spark plug cover is. Once you figure that out there will probably be size 10 or/and 12 bolts honding it down. Take that off and there you will see sensors connecting to each other and holding the spark plug in the cylinders. Unplug all the sensors and pull out the circular plugs holding the spark plugs down. THey might be a little tight and hard to get out so you're going to need to give it a good tug. once you pull them out MAKE SURE YOU DONT DROP ANYTHING INTO THE CYLINDERS. You can look down into them and see the spark plugs. Get your spark plug wrench, extension, and socket wrench and stick them down in and push so that the spark plug wrench grabs them. Just simply unscrew the plugs, pull them all out, and then put the next ones in, and tighten them down. Just connect all the sensors, and put the cover back on and you're done. Pretty simple.
Two words, "Ignition Module".
under the coil packs and the coil packs are connected to the spark plug wires
Not to be course, but if you cannot find the spark plugs, then you have no business trying to replace them. You do not have the knowledge or skill to perform this repair.
The brake system is important to keep maintained. A diagram for the brake lines in a 1992 Paseo can be found in the cars manual for maintenance.