Haynes Repair Manual. I had to replace front passenger side wheel bearing. The manual will walk you through it. I did have to get a pulley puller in order to get the brake disc off. Pretty straight forward though.
The bearings are not replaceable, they are a part of the rear hub assembly - the studs and the bearings are pressed in - replace the whole hub assembly - 4 bolts are holding it. Rear bearing/hub bolts (new only) are to to be torqued to spec. [2000 Montana - 85 Nm (63 lb ft)]
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
it is a 2001 Pontiac Montana that has broken three bealts so far I need to know what pully I will need to replace?
with explosives
Depending with the experience and the expertise of the mechanic. it may take up to 1 hour to replace 2006 Pontiac L Montana.
It's an automatic, there is no clutch.
One at a time
u dont
In exhaust pipe before catalytic converter unscrew to replace
I was charged $250.00 !
The throttle position sensor can be removed by dismantling the chassis in which it sits. This can be done by referencing the owner's manual f the Pontiac Montana.
You can't replace just the wheel bearings. You have to replace the whole hub assembly. Costs about 200 bucks per wheel at a repair shop. I have had both of mine replaced.