No body make one for the caddy. You need to make a adapter plate for the manifold so you can bolt on carburetor.
ANY year that has a carburetor intake manifold available to install on the block/heads.
yes. need to buy / mod the intake manifold for the new carb. low pressure fuel pump. and carb. and the distributor iia. that's all.
Change the intake manifold and fuel pump... And naturally put a carb on top of the new intake.
tbi engine top end is different from carb engine top end. on a carburated engine, the intake and heads use 90 degree angles for intake mounting bolts. on a tbi engine, the intake and heads use 75 degree angles for intake bolts. you can choose one of these three options: entire new engine. intake manifold designed for tbi heads but utilizes a carb mounting flange on top or tbi manifold to spread bore or square bore adapter
first install new carb gasket to intake manifold and then 4 nuts hold the carb to the intake studs and then install the throttle linkage to the carb.
Yes , but you also have to change the intake manifold
its in the front of your carb. underneath the intake manifold.
Probably not. Unless the previous intake and carb were not functioning properly.
Yes , but you would have to change the intake manifold also
Yes , but you would have to change the intake manifold also
you can as long as you use your TBI heads if you want to use the vortec heads with TBI you will need a special intake manifold or a carb manifold with a adapter to mount your throttle body to the carb manifold heres some more info TBI heads will mount to the vortec block TBI intake manifold has 12 bolts vortec intake manifold has 8 bolts
put new gasket on the intake manifold and bolt carb down to intake manifold and hook up all linkages and hoses.