You have to get the whole back glass, the seal is attached to the glass and that is the way it comes.
age
You put the seal on the glass then put the window in the frame. This eliminates the pressure on the glass. IT is easier to run a glazing tool around the metal frame without damage than it is to run it around the glass.
The address of the Ocean Beaches Glass is: 11175 Nw Pacific Coast Hwy, Seal Rock, OR 97376
Use the magnifying glass (bottom right) to find out which jewel has the Nabooti seal on it. The jewel will be near the bottom left, so look for the triangular mark.
You unseal the glass from the plastic bezel it has an adesive wich keeps the two parts toghether, after you clean the glass you use a new adesive to seal the two parts back toghether.
A seal, a stamp; an impression of a seal; any mark or impression.
It is mostly avoidance of glass-glass seals for bases, particularly strong alkalis, that is required. Glass is slowly attacked by strong alkalis and many bases react with atmospehric carbon dioxide - both reactions can lead to the formation of compounds that effectively cement together a glass-glass seal. You get the same reactions within a rubber/plastic-glass seal, but the plasticity of the seal makes the stopper relatively easy to remove.
Bonded glass is a way to seal materials with an intermediate glass layer. It is used for micro machined structures and uses low melting glass.
heaven seal
Its wear there is no rubber gromet for the stem and bowl, with a glass-on-glass setup the bowl and stem are 'frosted' and fit together withour a rubber seal
You have to drop the steering column and pull the dash. Then after locating the heater core case below windshield you have to cut out a piece with a Dremel. After replacing the heater core you have fun putting everything back together..(use plastic weld to seal the case back up).in other words don't do it yourself it is a huge pain.
Mark ALDANOV has written: 'The ninth thermidor' 'The fifth seal'