One source for parts is Alexandria General Supply. See the link below. Parts for the POP Powerlink 30 are likely to be available for special order only.
to use a pop rivet gun you have to get two pieces of metel and drill 2 holes into the metal
jimmy
Yes you can.
pop rivits are blind rivits to attach parts. Most of the time is metal to metal. Rivits can be bought at hardware store.
The stem of the rivet is discarded. It is pulled in to the rivet gun and breaks off at a cetain point.
It installs rivets. Usually these are pop rivets. The standard rivet tools are air hammers.
Yes. It would be very difficult to pull the shank through the flange without a rivet gun.
Makes a quick, permanent fastening when you can only reach one side of the material.
Pop Rivet.
The main one being that pop rivets can be attached with a blind spot.
If your points aren't too short, the easiest way to remove your dart points is to put the dart with the dart point in a pop-rivet gun, squeeze the trigger and your point will stay in the rivet gun and your barrell will fall out minus the point, easy!
A pop rivet, of course.