Apparently Sears recycled the model number for this to a newer incompatable model. I have found that many of the parts for this one were used on sears model 358796130 and are still available through Sears parts Direct. things like the three fuel lines (21052, 21053, and 21054), the fuel filter (26034), air filter (24371) spark plug (361258 CJ-14) and carburator gasket kit (35186) are still available with substitution numbers. I figure these are the most looked for parts so I inluded them here.
Craftsman
in need of a flexible drive shaft part no. 30-93936 for a sears craftsman 26.2cc gas weedwacker. Model #358.798131-26.2cc. Any suggestions?
You should be able to get them at www.searspartsdirect.com
Turn the "bumper knob" counter-clock wise and the reel assembly will come loose.
I found it at Bob's Manuals. No registration needed! Craftsman 358791580 Manual
The manual is available from ManageMyLife.com which is one of Sears sites. A link to the manual is below and directions begin on page 8 and contine on the following page.
40:1 is the correct mixture for the fuel and 2 cycle oil. 3 oz. of 2 cycle oil per gallon of gas. I have Craftsman Line Trimmer 358.795190 (Model #). It has the quick release shaft for other attachments. Hopefully this will help you.
Go to Sears.com, then at the top of the page, click on Parts Direct. A box will appear where you can enter the Model #. On the page that comes up, click "View Manual". A .pdf file will open which you can save to your computer.
Railroad Model Craftsman was created in 1933.
The Sears/Craftsman manual reqiures a 16:1 fuel mix. That is 8 oz. of 2-cycle oil to 1 gal. of gas. This is assuming you don't buy the generic "oil for all mixtures" stuff.
Champion RCJ-6Y
0.025 in gap (0.63mm)