One can purchase a Delta bathroom faucet from many different stores and retailers. Some examples that sell these faucets include eFaucets, Home Depot, and Plumbing Depot.
you can go to homelava.com to have a look
Behind shower valve handle and trim plate
Not always, there is a standard shower valve that most handles will work for. it depends on what your set up is. As far as the shower head is concerned you should be able to put anything on.As I'm standing at Home Depot looking at all the different shower valves on the display I wonder which one is the "standard" that all handles and trim fit on. The fact is unless you are replacing with it the same valve or in some cases the same brand all the trim plates and handles have to be changed.*It TOTALLY depends on the brand and make of your faucet. You would have to determine what brand the faucet is(ex. Moen, Delta), The next move is to determine which model it is(ex. Moen Heritage, Delta Leland). Then you get their own catalogue # and determine what cover plate, handle and screws will fit onto your existing faucet, order them, and replace them. ALL FAUCETS AND THEIR PARTS ARE MADE DIFFERENTLY!!!*Cheers, QuiteSomethingAns 4 - YES, you DO need to replace this valve unless your new fixture is identical
Yes. Recessed lights consist of two parts, the trim and the housing. The housing is the light fixture that is installed in the ceiling, and the trim is the light itself.
It's also called an escutcheon, it's the metal plate that covers the connection between the faucets and the counter top.
They plain mainly in white, with black, red and yellow trim. Their away strip is green.
The trim should just pull down. Because it is a recessed fixture nothing is screwed in it is all friction fit. Most trim kits have two spring wires that hold the trim to the ceiling. Once the trim is pulled down just release the springs on both sides of the trim to remove it completely from the fixture.
The trim should just pull down. Because it is a recessed fixture nothing is screwed in it is all friction fit. Most trim kits have two spring wires that hold the trim to the ceiling. Once the trim is pulled down just release the springs on both sides of the trim to remove it completely from the fixture.
Talk to a salvage yard. also you can try calling a local glass replacement company ,some of them offer new trim kits and installation.
White teflon is common. Just trim with a razor if concerned about appearance.
A trim kit is just the outside parts that you see. This will make you faucet look better, but it wont affect the function of your old valve. If your shower valve doesn't work right, replace it.
That is the handles, screws, face plate and everything except the rough in valve. The rough in is the main body of the valve that is installed in the wall before drywalling or putting the tub/shower in. The trim is put on after the walls are finished.
None. ONLY A/S will work with American Standard. All plumbing fixture companies only have parts that will fit their own products and no else's will fit theirs.