The PT Cruiser A/C low pressure switch is on back order at Chrysler. The original part is:
MOPAR (Chrysler original) part (5058736AA)
Part number 5058485AA was superseded by part number 5058487AA.
There is an after market part that is an exact equivalent.
Santech #MT1191
Santech
2450 Handley Ederville Rd.
Ft. Worth, TX 76118
You can order it and receive it within a couple of days from your local AutoZone.
The price is about $ 30.00 This is Joe Fewell - Product Manager Santech Industries. The MT1191 is the Low Pressure Cycling Switch for the 2007-2001 PT Cruiser. It is located on the Block Expansion Valve @ the Firewall. These Parts are in short supply. You can use a GM Switch and Pigtail in place of the Chrysler Switch. Part Number MT0205 Switch & MT0135 Wire Harness. CARQUEST P/N 207654 & 207652. Has the same M12-1.5 Thread - PSI = 44 on / 24 off. You can e-mail me @ joe.fewell@santech.com if you have any questions.
Low oil pressure or failed oil pressure switch.Low oil pressure or failed oil pressure switch.
Trouble code P0452 means: Evaporative Emission System Pressure Sensor/Switch Low Input
The 1994 Pontiac Trans Am air conditioning low pressure switch is on top of the air conditioner compressor. The low pressure switch will be labeled as the low pressure port.
Of which low pressure switch are you speaking? Engine oil pressure switch? If you're checking that, remove the oil pressure sending unit and temporarily put in an oil pressure gauge. If you're checking the AC low pressure switch, pull the switch from the AC low pressure line, Jumper the switch socket and see if the AC compressor comes on. If it does, you either have low refrigerant pressure or a bad switch. If you KNOW the pressure is up and everything else works, you have a bad switch.
The 1997 Pontiac Sunfire air conditioning low pressure switch can be found on the top of the air conditioning compressor. The low pressure switch will be labeled as the low pressure port.
The 1997 Toyota Avalon air conditioning low pressure switch can be found on the top of the air conditioning compressor. The low pressure switch will be labeled as the low pressure port.
The low pressure switch is mounted near the ac compressor. It is a two wire switch mounted in the low side line.
on a 2005 Honda Accord where is the low pressure AC switch
This vehicle does not have a low pressure switch. It has a pressure transducer instead. The pressure transducer is located on the refrigerant line next to the alternator pulley.
A pressure switch a valve that shuts off the unit when the pressure is to low or to high
Oil pressure is low, oil pressure sensor has failedOil pressure is low, oil pressure sensor has failed
You can bypass the AC low pressure switch, on your Toyota Corolla, by removing the switch. You can remove the wiring to the switch and leave the switch and place.