Want this question answered?
You have a burned out bulb on the right side. Even a the side marker bulb will affect the turn signal
The Turn Signal Relay is part of the multifunction lever. It can easily be removed separately after unscrewing the centre console housing.
Check your turn fuse. Or the connection between the flasher and the turn signal. Sorry I mean check the connection between the flasher and the turn signal switch.
I have the same problem basically, after looking at the schematic, etc., the only thing I came up with is that the whole turn signal sub assembly must be replaced. I removed the turn signal fuse and its stops, which coincides with the schematic. If the ignition is turned on, the clicking from the flasher will sound, if off, it will not. I hope this helps, replacing the turn signal assembly is not easy, and you should get a manual from an auto parts.
The fog light switch is on the end of the turn signal switch. Just pull the end of the turn signal switch and the fog lights will come on. (Turn signal switch and fog light switch are one assembly)
It is the combination turn signal, high beam, head light switch.
I have a short in the instrument clusters and turn signal. I need an electrical schematic for a 1980 SD diesal Mercedes.
On the turn signal lever next to the headlamps switch. It's the one that controls the dashboard light brightness
The turn signal relay is underneath the dashboard on the drivers side in the fuse box. If you are looking for the acutal turn signal its on the steering column.
1984 Oldsmobile Custom Cruiser turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
When replacing the rear turn signal on a 1999 Acura Integra open the trunk. Locate the rear turn signal housings and find the bulbs. Remove and replace the bulbs.
it's normally under the dash.. turn on the turn signal and find the device that is clicking. That shoudl be the flasher unit/regulator/relay