hi i have a 2007 883 and my book says models equipped with mid-mount foot controls: 1.remove left side rider footrest and mounting bracket assembly. anyway 2.remove six screws from clutch inspection cover. remove clutch inspection cover from primary cover. 3.remove and discard quad ring. 4.with vehicle positioned upright(not resting on jiffy stand) pour 32 ounces (946ml)of transmission and primary chaincase lubricant throgh clutch inspection cover opening. 5.verify that lubricant level is even with bottom of clutch diaphragm spring with bike upright. 6.install NEW quad ring. verify that quad ring is fully seated in groove of primary cover using six screws. tighten screws in a crosswise pattern to 84-108 in lbs. 7.models equipped with mid-mount foot controls:install left side rider footrest and mounting bracket assembly. tighten footrest bracket mounting screws to 45-50ft-lbs
You can use any SAE certified transmission fluid in your 1987 Harley-Davidson Sportster motorcycle. The manufacturer recommends that you never overfill the transmission fluid.
through the clutch inspection cover. The Primary and transmission share fluid.
Harley Sport-Trans Fluid if you can find it. I use it in mine religiously. Works great!
through the clutch inspection cover
1 quart of oil should do the trick
Your 1976 sportster holds one quart of fluid. I use HD Sportlube or HD PRI ANDTRANS LUBE, but in the olden days I used a 20 wt non detergent motor oil. This fluid lubes the clutches and transmission gears and primary chain.
have a 1976 CC FLH harley davidson need to whats the transmission fluid weight
You should only use Harley transmission fluid from the dealership. It's engineered by Harley for their transmissions.
5000
Use Harley trans Fluid or Harley Formula +
under the back of the primary. either feel around or look under the primary and you will see it. Sportsters use the same fluid for the trans and primary.
Every 5000 miles.