what you actually want to do is use a continuity tester, the element actully gets because it creates a controlled short, kind of like if you touch a wire to both posts on a battery any how there are two screws on each element that is where you connect the tester.
I'm preety sure no, are you using a App to connect it?
Yup called a diaphragm tank and NOT connected to the domestic supply
A laptop IS a computer. They can certainly be used for most applications without being connected to anything. Many have wireless capability and can connect to the internet without being directly connected to anything else, but they are connected, it's just wireless.
Gravity will attract 2 or more object with or without the presence of an electric source/field.
wireless conectivity is t6hings like bluetooth things that can connect with other devices without wires connected
Even if you know how to reconnect it safely, you can probably be charged with theft if you reconnect it without authorization. Whatever the reason it was disconnected, the electric company may want to inspect or test the connected wiring to be sure it is suitable condition to be reconnected. You will not likely be authorized to connect it yourself. Likely only electric company personnel or a licensed electrician would be authorized.
Yes, the phone is electric and cannot work without a source of power. You can charge wireless phones through chargers connected to walls, however this charge will deplete over time. Batteries store this electricity and as the phone is used, so is the power. However there are phones that are plugged directly into a phone line wall socket. This has the ability to draw out electricity as well as connect to the network, making sure the phone connected to it is always charged.
Yes. TiVo does not require a wireless network. It can be connected through a cable to a wired network.
The resistors should be connected in parallel .
If someone wants to check the voltage from SMPS even without it being connected to the motherboard that can be done by using a voltmeter. This if connected carefully can indicate the voltage.
Peer Exchange (PEX) allows you to connect to new peers through a peer you are already connected to. Ordinarily peers connect to each other through trackers. PEX allows them to connect without a tracker, by communicating with each other.
Wire is sized by the amount of amperage the device to be connected draws. Without this data the question can not be answered.