The upstream heated oxygen sensor is located ahead of the catalytic converter The downstream heated oxygen sensor is located behind the converter
The upstream heated oxygen sensor is located ahead of the catalytic converter The downstream heated oxygen sensor is located behind the converter
The O2 sensor on a 2000 Hyundai Elantra is removed by disconnecting the wiring harness and unscrewing the sensor from its housing. It can then be removed from the vehicle, inspected, and replaced if needed.
1997-2000 Hyundai tiburon, 1997-2000 elantra.
Remove the bolt holding the sensor to the front of the engine blockPullUnclip the electrical connectionInstallation is the reverse of removal.
find the location of a 2000 hyundia elantra starter
The Engine coolant temperature sensor is installed in a coolant passage which is located at the front left cornerof the cylinder head.
no, different designs.
On the exhaust pipe. One is under the "HOT" plate, one is under the engine.
Its should be same thing
The spark plug gap for a 2000 Hyundai Elantra should be set at .044 inches. New spark plugs will be preset at the factory.
The starter on a 2000 Hyundai Elantra is located along the bottom, left side of the engine. It bolts directly to the engine block and is protected by a shroud.
no it won't the 2000 has diffrent plugs by the dip stick its a six pin . i made that mistake and got a 99 at trans for my 2000 and notice its the same in a accent 97-99 and the elantra but change in 2000 hope this helps