Want this question answered?
low gear oil or gears are worn.
the only place you put gear oil is in the rear end. Look on the differential and on the back there is a large nut, remove it to put in the CORRECT gear oil.
The GMC Sonoma 2.2 litre manual transmission hold 12 quarts of transmission gear oil. Keep in mind there is a big difference between gear oil and automatic transmission fluid.
Automatic Transmission. You can also get semi-automatics where the driver decides what gear to put the car in, but the gear changes are done by an automatic mechanism.
Automatic Transmission. You can also get semi-automatics where the driver decides what gear to put the car in, but the gear changes are done by an automatic mechanism.
It means that more gear oil is put into the gear box in order to have it at the right level.
Change the gearbox oil and see if that helps. If it doesnt it will be the gear selection sensor.
Automatic transmission oil is basically hydraulic oil for use in pumps. It is NOT recommended for use in any manual style transmission. All automatic transmissions in ATVs are a CVT type, and use no fluids. You should buy the proper gear oil for your ATV transmission as instructed in the owners manual.
There is a plug on the from on the tranny on the top. Take a funel, put it in the hole and put the gear oil.
If it is 4WD, put put the transfer case in Neutral, leave the automatic in Park or standard trans in gear. If it is 2WD, automatic would have to have driveshaft disconnect, standard trans just put in Neutral.
To put oil in a gear box of a Chrysler PT Cruiser, first plug minor coolant leaks.
Gear oil (80W90 or similar) is used in the transfer case and differentials.