You have to remove the left side headlight bulb. With the bulb out, use a hose and funnel to put the starter fluid into the headlight cavity, then put the bulb back in. Be careful not to add too much starter fluid as excess may leak out and is considered to be an environmental hazard.
You can spray starter fluid directly into the air intake. You can also remove the cover to the air filter and spray it directly into the air filter.
lubrication lubrication
Replace the fuel filter. Spray starter fluid sparingly into the intake while cranking to get it started. i would put gas in it lol and then use starter fluid to jump start the fuel pump
The year, make, model and engine info would help.
well my starter ingage when i put the the batterie cable on , new starter selonoid, starter,altnator, so whats the problum
Starter fluid is sprayed into the air intake or carburetor of snow blower. This allows the vehicle to have highly flammable ready to burn when it is started.
Starter fluid should be sprayed into the throttle body intake. Spray in small amounts, as the fluid is highly flammable. Any over spray could ignite if the engine backfires.
The starter relay is inside the starter. You will need to replace the starter.
It is not recommended.
You don't. Starter fluid is a really good way to damage the motor inside because it created far more pressure than the motor is designed for. It's best to find and fix the problem rather than use the fluid. You would put starter fluid in the gas tank.
i tried it all it did was backfire still wouldnt start Spray the starter fluid into the air filter intake. If it backfires and will not start you have a problem that needs to be fixed.