answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Where does EGT go on 4 cylinder Lycoming engine?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Things to do in lycoming county?

go to tons of their parks


How long can an egt test go back for alcohol?

About 72 hours.


How many inches from head does EGT probe go on Jabiru 2200 80hp?

2"


Where does the oil go on a 1968 impala?

the 6 cylinder is on the front of the engine ===the 8s are on the right side of the engine


What are the cylinder numbers on a GM 3.6L enginel?

Cylinder 1 is closest to front of engine, by where serpentine belt is. The cylinders on the same side of engine as cylinder 1 is are the odd cylinders, opposite side are evenly numbered cylinders. The cylinder numbers go up in order as the distance away from front of engine.


Where does the oil dipstick go on the engine on a fiero gt 6 cylinder?

The dip stick is on the back right corner of the engine


How many quarts of oil go into a 2 liter 4 cylinder engine?

4.5


What is the meaning of tdc concerning a engine?

TDC with regards to an engine means Top Dead Center - and that means a piston is at the highest point in the cylinder befores it starts to go back down the cylinder


Why won't my2004 Colorado won't go into gear when the engine is running?

slave cylinder failed?


What does it mean when only 5 out of 6 cylinders fire?

It means that the engine is "missing." With the engine running, pull the injecter wires on each cylinder. If the engine changes pitch or runs worse, go to another cylinder. If there's no change, then you've found the bad cylinder. Check the plug for fowling, the injector for operation, and finally try a compression test on the affected cylinder.


If you have no oil in the engine would that cause the seventh cylinder to go bad?

http://wiki.answers.com/Q/If_you_have_no_oil_in_the_engine_would_that_cause_the_7th_cylinder_to_go_bad"


Why would brake pedal go to floor after engine started?

Low fluid level or defective master cylinder.