condenser
Refrigerant compaticilty is about suiting the refrigerant to your refrigerant system. Every cooling system has refrigerant in it which depends on the type of system you use. If the refrigerant not matches with your system, it wont work. This is refrigerant compatibility.
Liquid receivers are used to store the liquid refrigerant after it leaves the condenser. It should be located below the condenser to enable natural flow. The receiver may be constructed either vertically or horizontally and should have sufficient capacity to hold the entire system's refrigerant charge. The design should be such that only liquid refrigerant leaves the receiver and enters the liquid line. by vishal mahnn
To endure that the ONLY gas in the system is refrigerant.
Liquid refrigerant charging of a system is normally accomplished in the liquid line. For example, when a system is out of refrigerant, liquid refrigerant can be charged into the king valve on the liquid line or receiver.
Liquid
Vaporizing the refrigerant
the Caste System
The refrigerant in the refrigrration system absorbs large quantities of heat and releases it to the atmosphere
Freon is odorless. The oil in the refrigerant system does have a distinct aroma.Freon is odorless. The oil in the refrigerant system does have a distinct aroma.
ghjbkjhkhjkhkhkk
Add refrigerant vapor on the low side of the system ,the compressor raises the pressure of the refrigerant on the high side of the system and lowers the pressure on the low side
Add refrigerant vapor on the low side of the system ,the compressor raises the pressure of the refrigerant on the high side of the system and lowers the pressure on the low side