I actually found it after viewing another post. The port is behind the intake manifold above the EGR valve. Very tight space, so feel around back & connect that end first. Then connect the PCV end. Much easier that way. I believe it's the same for 01-04 Trackers V6 2.5L.
The 2002 Chevrolet PCV valve is located on the outside of the air intake housing. The valve will be on the back of the housing.
16 valve 1.6 liter 4 cylinder.
Valve cover
The lock valve is connected to a hydraulic cylinder by forcefully pressing it into the fitting and releasing the retaining ring. This will lock the cylinder into place and keep it from moving.
There will be a valve at the bottom of the Bunsen burner. Using a rubber tubing connect the valve to the regulator of the LPG cylinder.
the pcv will be located on the top of the valve cover with a 3/8th vaccume line connecting to it
its the small round cylinder on the throttle body. its built into the throttle housing. bottom pic little round cylinder on right bottom
As with all valve gaskets it is located between the valve cover and the head. To get to it you undo all bolts holding the valve cover on and then pull valve cover off. you will find it on the valve cover/ head contact point.
Depends on which engine you have. Do you have the 2.5 4 cylinder or the 2.8 V6? On the 2.5 4 cylinder engine it is on the center of the intake manifold near the valve cover. If you have a 2.8 V6 it is on the intake manifold near the throttle body.
on the side of the valve cover
connects to throttle body(port C )
iT HAS 1 COIL PER CYLINDER, tHAT'S WHAT YOU SEE MOUNTED ON THE TOP OF THE VALVE COVERS AND HAS A SPARK PLUG WIRE GOING TO THE PLUG/PLUGS. 6 cylinder has 6 and the 8 cylinder has 8