what do you mean connect? wire, or the whole sender
It is located on the bottom of the oil pan. You must drain the oil first. Remove the bolts from the sensor. Disconnect the sensor from the sending unit wires. Then just fasten the new sensor, connect the wire clip to sensor and fill the oil back. Optional, disconnect battery before installation to reboot computer and reset code. Good luck.
Your oil temperature gauge will connect to the oil pressure sensor. The water temperature gauge will hook up to the water temperature sensor. The oil pressure sensor will be on the left-hand side of the engine and the water temperature sensor will be on the front of the engine.
Engine Oil Pressure Sensor and/or Switch Replacement == J 35749 Oil Pressure Switch Socket # # Remove the air cleaner outlet resonator. # Disconnect the oil pressure electrical connector. # Remove the engine oil pressure sensor (1) usingJ 35749 . # # Install the engine oil pressure sensor (1) using J 35749 . # Connect the oil pressure electrical connector. # Install the air cleaner outlet resonator.
can a knock sensor leak oil for 305
It is not an oil level sensor it is an oil pressure sensor. It just unscrews.
The oil level sensor for the engine is generally located in the oil pan.
The 1991 Acura Legend does not have an oil temperature sensor. It does have an oil pressure sensor. The oil pressure sensor will be located on the left-hand side of the engine.
Oil level sensor is on side of oil pan.
no
I do believe that the oil sensor in a 1996 Jaguar tells you how much oil you have and it tells you the oil temperature.
There is no "oil cam sensor". There is a oil pressure sensor and a cam sensor, but they are two different sensors.