either the ECM engine control module, or the IDM injector control module. Most vehicles only have the ECM now.
a CKP or crank sensor provides the PCM with a crankshaft position signal. The PCM uses the signal to determine the firing order for each cylinder. a CMP or cam sensor is very similar to a CKP, but produces pulses in relation to only cylinder #1 at TDC, a CMP determines the timimng for fuel injection on each cylinder
Each component signal has no relationship with others.Orthogonal signal is denoted as φ(t).Orthogonal signals can be completely separated from each other with no interference.
cylinder
the base of a cylinder is a circle.
The 3.5L has a coil on each cylinder.The 3.5L has a coil on each cylinder.
Most of the core races in Pathfinder originate from other Pathfinder products.
The shape of each base of a cylinder is circle. Also, the base of it can be a pair of congruent or parallel.
two, one edge at each end of the cylinder
That depends on how many cc each cylinder has. Assuming all the cylinders have the same volume, you can multiply the cc of one cylinder by eight.
•Measures each point in a single cycle of a signal relative to its point of originPhase tells you the delay in a signal
Ah Ion sensor reads the electrical impedance of the fuel/air mixture in each cylinder and sends that reading to the ECM. When the Ecm receives the signal, it makes a judgement with relation to the duration of the spark. The Ecm will adjust the spark duration for that cylinder in an attempt to make the ion data match an optimum waveform or pattern stored in the memory. Each cylinder has its own signal and therefore each cylinder can be adjusted individually according to the wave form stored.
A homing signal is a signal that alligators send to each other at their homes to tell them where they are.