Go to an auto parts shop
wiring diagramfor 1968 windshield wiper motor
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
its the black cover right below the windshield, it covers the wiper motor.
The windshield wiper motor is located just below the windshield wiper blades and is covered by a black panel.
One could purchase a windshield wiper motor at a retailer such as AdvanceAutoParts. Alternatively, one could also purchase a windshield wiper motor online on Amazon or AutoZone.
The windshield wiper motor may have a short in it. The windshield wiper motor may not be grounded properly. Make sure the ground wire is tight and free of corrosion.
You can try Quadratec.com, Rockauto.com, or your local jeep dealer
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
The wiper motor is located under the black plastic cowl below the windshield.
# Remove the wiper arms # Remove the windshield wiper cowl cover # Disconnect the electrical connector from the wiper motor and remove the motor # Remove the wiper motor retaining bolts # Pry the linkage arm off the wiper motor pin with large screwdriver
dash