answersLogoWhite
Chrysler

Where is 1 plug wire on Chrysler 225 engine slant six?


Top Answer
User Avatar
Wiki User
2008-08-28 00:59:26
2008-08-28 00:59:26

very front of motor

Related Questions

User Avatar

PO303 indicates a misfire on cylinder #3. Normally caused by bad spark plug or plug wire.

User Avatar

hot wire on the timing light goes to pos. side of the battery and the neg. side of timing light goes to ground on the engine someplace and then the plug clip goes on the #1 spark plug wire.

User Avatar

Remove the spark plug wire from the spark plug. Use some heavy gloves or a set of insulated pliers to hold the spark plug wire about 1/4-inch from the engine block (ground) and crank the engine - you should see a spark jump from the wire to the engine ground. For a better check, use another spark plug and put it on the spark plug wire and use it as a "jumper" from the wire to the engine ground.

User Avatar

Spark plug, plug wire, distributor cap, injector, internal engine Spark plug, plug wire, distributor cap, injector, internal engine

User Avatar

The causes for cylinder 2 to misfire in a 2001 Chrysler Sebring with a 3.0 engine is a faulty spark plug or a damaged spark plug wire. In-depth troubleshooting can be completed by a local mechanic or dealership.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.