answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Where is Speed pulse wire for a fiat stilo?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the speed pulse wire in a Toyota Corolla?

where is the speed pulse wire in a Toyota corolla


Where is Speed pulse wire for a fiat ducato?

on the fuse box the blue connector 40 pins is pin 7 or 52 pins is pin 10 , if no wire you need to add.


Speedo pulse wire?

A speed pulse wire might refer to the speedometer pulse wire that accepts pulse signals in order to display speed. This wire is generally a two wire sender unit that comes pre-calibrated to the vehicle.Ê


Where is the Speed pulse wire on a octavia 2009?

The speed pulse wire on a 2009 octavia is pin number 9 on the multi plug connecter on the back of the speedo cluster , remove plug and all the pins are numbered .


Where is the speed pulse wire on a 2005 ford focus?

It is found at the back of the radio and it is a thin green/white wire. Malby


Speed pulse on Skoda superb?

remove the stereo with two radio pullers in the side slits on stereo there is a blue and white wire that gives you a pulse


Where is the vss wire in Honda Odyssey 2007?

on the automatic transition and PMC (vehicle computer) blue with white wire (wire A30 VSP - vehicle speed pulse)


Where is the speed pulse wire on a 2008 Ford Mondeo?

To obtain a speed pulse you would require a CanBus Unit and connect it to the correct can wires. Usualy the OBD 2 socket. Pins 14(can low) and 6(can high). :)


If you pass a magnet through a coil of wire you get a pulse you get some amp out of it so to get more current what is more important the speed of the magnet or the amount of wire?

You get more voltage with higher speed and more amperage with more turns of wire. Also by adding more coils of wire carrying current around the iron core


Speed sense wire on a 2007 dodge charger srt8?

there isn't a speed pulse on the new dodge vehicles, you have to use an aftermarket gererator. like the soundgate CAN VSS works via the CAN system


Where is the speed pulse wire on a 2001 Ford Explorer?

well if the 2001 is in the same generation as the 98-2000, then the wire is gray with a black stripe and can be found in the harness that goes to the fuse box under the hood.


How do you connect a speed pulse on a Dodge Magnum?

the easiest way that i have found is to buy a manual (Haynes or Chilton) and it has a full car wiring diagram towards the back. find the one that is labelled "speed pulse" and it will give you the color of the wire. locate it in or under the dash in the main harness and tap into it with a clip.