Want this question answered?
First of all, the force of compression impacts the bridge. Also, the force of tension inmpacts the bridge because the more cars there are or any weight the bridge stretches which is tension. tthe force of gravity weighs the bridge down and that is why the bridge has to withstand that. Wind can affect the tower bridge because if there is a huriccane the bridge has to be able to stand without any damage.
Tension and Compression
the load is compression and tension
Compression is pushing things together and tension is pulling things apart. A clothesline is under tension and a stack of firewood is under compression. How it affects the bridge depends on how well it is engineered. Properly built it'll hold up to its various loads w/o problems,
Compression is pushing things together and tension is pulling things apart. A clothesline is under tension and a stack of firewood is under compression. How it affects the bridge depends on how well it is engineered. Properly built it'll hold up to its various loads w/o problems,
Compression, Tension, Torsion, and the other is either bending or shear.
The forces of tension and compression may work together by pushing the pieces of the bridge together. This can help ensure maximum even weight distribution, and ensure joint contact.
It's all about compression and tension. Compression is the force pushing in on an object. If you sit in a chair your weight is a compressive force on the chair. Tension is the force pulling on an object. If you hang from a rope your weight puts the rope in tension. Stone is very strong under compression but can break easily under tension. An arch bridge only has compression forces within it so stone is a good material for an arch bridge.
it is under compression since both sides are being pushed towards each other.
tension is the opposite of compression, so it would be anything pulling in an object; cables on a bridge, a zipline, even when you reach out to grab something! there is so many things that are under tension or compression that are all around us.
The tension and compression members should be equally strong.
You must be referring to a "truss bridge". A truss bridge is a bridge that has straight connectors. These connectors are stressed from 2 kinds of stressors; tension and compression. It is one of the oldest and simplest bridges.