inside the cpu on the motherboard
The cam sensor is located on the transmission housing near the top close to the firewall.
Remove Glove Box. Fuses are located between fan housing and heater box. there are two fuses and a relay. Remove Glove Box. Fuses are located between fan housing and heater box. there are two fuses and a relay.
The blower is located behind the GLOVE BOX. Remove the GLOVE BOX and there will be 2 wires going into a plastic housing. In that plastic housing is where the BLOWER will be located. Let me know how it went.
It's located next to the air box by the cam shaft.
It is inside the HVAC housing behind the glove box.It is inside the HVAC housing behind the glove box.
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
its located behind the glove box on top of the blower housing.
The expansion valve is located under the dash. It is within the plasitc housing (box shaped) with the condensor coil. The plastic housing can be removed after taking out the glove box, metal cross bar, and disconnectng the wire harness that runs across the plastic housing.
Its located on the a/c heater housing below the glove box.................
In the HVAC housing behind the glove box.
It is inside the HVAC housing, behind the glove box.