It is on the driv side end of the cylinder head.
The external air temperature sensor on a Chrysler PT Cruiser is located in the front of the motor. It is in the air intake tube that goes from the air cleaner to the motor.
There is no such part as an idle sensor. Idle speed is a computer output that involves dozens of inputs.
It is the three wire sensor on the driver side end of the cylinder head.
Chrysler does not use reset switches.Chrysler does not use reset switches.
It is on the engine, just below the radiator cap.
cost me $200 , which included camshaft sensor
Should be at the front of the vehicle, usually before the rad, some vehicles the sensor is mounted on the front bumper reinforcement.
The crankshaft position sensor on the PT Cruiser is on the side of the engine above the oil filter. The sensor is removed with two screws. Unplug the wiring, remove the bolts, then install the new sensor.
It is on the driver side end of the cylinder head.
It is on the driver side end of the cylinder head.
In the front under the starter you have to get to it from under the car
Throttle position sensor signal does not agree with manifold pressure sensor signal.