Want this question answered?
Behind the grill on the passenger side. It is a very small horn that is hard to see.
Where is the evap purge control valve located on a 96 camaro
under the hood!
The PCV valve is located on the right side of the valve cover. After removing the hose, there is a retainer clip then the valve can be removed with pliers.
Looking down on the engine, the EGR valve is to the right of the rocker cover, connected to the head.
on my 96 2.4 its right on the valve cover,has a hose going to the intake manifold
It's on the top of the drivers side valve cover towards the firewall end
I don't know about the 96', but for the 98' and 2000 it is located on the top of the valve cover on the passenger side near the back. Just pull the hose out and replace the valve on the end. .
its under the intake towards the front of the motor
It is located somewhere on throttle body, just unbolt and bolt new on on
Just tighten it you don,t need a spec for valve covers just not to tight just be dillegent and you will be fine
take the valve cover off and it should be located toward the rear of the engine write across from numder 4 intake valve