Want this question answered?
i am pretty sure the gt had the 2.5L engine. if that is the case this is the procedure: 1. relieve the fuel pressure. 2. disconnect the fuel return tube. 3. remove vacuum line from fuel pressure regulator 4. remove mounting bolts to fuel rail and remove regulator 5. remove the o-ring from fuel rail and replace before installing new regulator reverse procedure to install
1997 thru 1999
it's on the fuel rail passneger side behind and under the throttle body to get it off you have to remove the upper intake and fuel rail
six
what is the fuel pressure on a 1987 fiero gt
it should be around 4psi
This is not an easy job. You have to remove the trim pad first. TAke it to the auto trim shop.
Change the fuel filter before you go any further.
41 to 47 psi
I own an 87 Cobra GT with a 306, E303 cam, GT40 heads and intake, 24lbs injectors, much, much more and a Vortech Supercharger.....at idle, fuel pressure is at 42 lbs.
The voltage regulator is in the alternator.
its located underneat the dashbourd on passenger side consule panel.