Want this question answered?
The idle adjustment is a small, black thumb screw located on the lower right side of the air cleaner, attached by a clip to the back side.
Idle is computer controlled, no adjustment screw.Idle is computer controlled, no adjustment screw.
There is no adjustment screw, idle is automatically controlled by the pcm.
choke idle adjustment on 1988 Buick Riviera
The idle adjustment screw is located on the IACV behind the manifold on a 1998 Honda CR-V. Open the latch on the IACV then take an screwdriver and tighten the adjustment screw.
there is no idle adjustment on the neons it controlled by the computer wich opens and closes the idle air control motor located on or near the intake
The IDLE is controlled by the computer. THERE IS NO ADJUSTMENT.
You can adjust the idle on your Polaris 90 by turning the adjustment screw on the side of the fuel pump. Turn the adjustment screw to the left to increase the idle speed.
There is an idle adjustment at the carb. Look where the accelerator pulls the butterfly stop and you will see an adjustment screw.
There is an idle adjustment and a air to fuel adjustment
under routine tuneup, you dont. engine idle speed is controlled by the ECM automatically. HOWEVER, if during a rebuild of the throttle body, there is a base idle speed adjustment screw that is capped and sealed at the factory. Adjustment of this screw is not usually required. if there is an idle speed problem first check for vacuum leaks followed by a dirty or malfunctioning idle air control valve (this will set a check engine light usually)
The Yamaha Raider does not have a idle adjustment based on the fact it has no carbs. It is fuel injected and auto adjusts based on the temperature and fuel delivery.