It is somewhere close to the oil filter
The 1986 Chevrolet Cavalier oil pressure sending unit can be found on the left-hand side of the engine. The oil pressure sending unit will be above the oil pan.
There are several sending units in that vehicle such as the fuel sending unit, the oil pressure sending unit, the temperature sending unit. Need to know which one you want to change.
Your oil pressure sending unit should be located above the oil filter, on the housing the oil filter screws up to.
On the front of the engine above the oil filter.
It is back by the Distributor, but to the right of it.
To replace the fuel sending unit in a 2006 Chevrolet Trailblazer, first, relieve the fuel system pressure by removing the fuel pump relay and running the engine until it stalls. Next, disconnect the battery and drain the fuel tank before removing it from the vehicle. Once the tank is out, remove the old sending unit from the top of the tank, install the new unit, and reassemble everything in reverse order. Finally, reconnect the battery, reinstall the fuel pump relay, and check for leaks before starting the vehicle.
DID U HAVE ANY ParTICULAR SENDING UNIT IN MIND ???
The oil pressure sending switch on a 1988 Chevrolet Celebrity with 2.8L V6 is located on the bottom of the block near the oil filter.
It is on the fuel tank sending unit. You can either raise the bed or drop the fuel tank to get to it. The sending unit fits in the top of the fuel tank.
In back of engine, on top, drivers side, close to distributor.
It is located next to the oil filter
The 1994 Chevrolet Astro V-6 engine temperature sending unit can be located on the front of the engine. The temperature sending unit will be next to the thermostat housing.