To replace the fuel sending unit in a 2006 Chevrolet Trailblazer, first, relieve the fuel system pressure by removing the fuel pump relay and running the engine until it stalls. Next, disconnect the battery and drain the fuel tank before removing it from the vehicle. Once the tank is out, remove the old sending unit from the top of the tank, install the new unit, and reassemble everything in reverse order. Finally, reconnect the battery, reinstall the fuel pump relay, and check for leaks before starting the vehicle.
The blower motor relay is located underneath the glove box on a 2006 Chevrolet Trailblazer.
The blower motor relay is located underneath the glove box on a 2006 Chevrolet Trailblazer.
road huggers
The exhaust system diagram, for your 2006 Chevrolet trailblazer, can be obtained from most Chevrolet dealerships. The diagram can also be obtained from most auto-parts stores.
2006 and newer use Dexron VI.
Should be on the bottom or side of the oil pan
The 2002-2006 Chevy Trailblazer 4.3L requires 7 quarts of oil.
7 oclock position behind the crankshaft pulley
Need to know which sending unit you want to replace, there are several.
you have to drop the gas tank and take out the fuel pump assembaly and its on there
A few weekends ago I had to replace the fan clutch on my '06 Trailblazer EXT LS. In addition to getting the P0495 code from the check engine light, when I rev'd it up it sounded like a jet engine. Instructions: http://www.diystew.com/2006-trailblazer/
It is somewhere close to the oil filter