It is on the back of the block, look up from underneath. It will be under a heat shield near the pass side close to the exhaust manifold.
It is on the back of the block, look up from underneath. It will be under a heat shield near the pass side close to the exhaust manifold.
It is on the back of the block, look up from underneath. It will be under a heat shield near the pass side close to the exhaust manifold.
The high pressure AC switch on a 2002 Chrysler Sebring is located on the passenger side of the engine bay. It is paired with the low pressure hose and is mounted near the coolant and power steering reservoirs.
The Chrysler Sebring knock sensor is located in the engine valve or cylinder located at the back of the motor. This part is in this position next to the engine valve so the sensor can feel the vibration of the engine.
No reset buttons on a Chrysler.
The PCM is located in the actual engine bay on a 2000 Chrysler Sebring. It is mounted vertically next to the battery tray.
If you are talking about the oil pressure sensor/switch. This is located on the engine itself towards the back firewall. It can be seen from the bottom of the car.
It is located on the right side of the engine (facing the engine ) near the the fuse box.
The 2002 Chrysler Sebring six-cylinder engine oil pressure light alerts the automobile operator when the oil pressure is too low. The oil pressure light will illuminate red.
It is under the hood, between the engine and grill.
engine have spark and fuel pressure and still will not start
The 2004 Chrysler Sebring fuse box is located in the engine compartment. The fuse box will be on the drivers side behind the battery box.
It is behind the engine mount on the radiator side of the engine.
in the front of engine it is driven by the timing belt.