EGR valve is on drivers side on top of the motor near the rear the transmission dipstick tube is probably on one of the bolts that hold it on not real hard to change just expensive the valve itself is not cheap. and make sure you change both gaskets were it bolts to the intake there is one under the valve itself and on the under side of the intake were the metal pipe is at
where is the canister purge valve located on a 03 chevy venture
That year did not use a modulator valve. The transmission is COMPUTER controlled.
mine is in the glove box.
Could you please tell me if a 1997 Chevy Venture has a heater control valve and if possible the location of the valve.
my heater fan in front of my 2004 chevy venture van wont work
How do i replace the purge valve on a 1999 Chevy Monte Carlo
The low pressure port for the air conditioning on the Chevy Venture is located in the center of the engine and sits inbetween the radiator and exhaust manifold. There should be a screw on cap on a valve stem.
With a wrench
The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.
where is the PCV valve located on a 2004 chevy tahoe
if you do all the work yourself, around $350 in parts. mechanic shop labor will be another $1000
were and how do you change a PVC valve on a Chevy avalance
top moter behind throtlebody
typically in the valve cover.
Were is the PVC valve located
Where is the ERG valve located on a Chevy Vandura 5.7 350 engine?
Passenger side valve cover
The pcv valve should be located on the top of the valve cover. It is located closer to the rear of the motor.
it is located on the passenger side wheel well...it has 4 hoses attached 2 going into the heater core and 2 going into the engine...simply disconnect the hoses and replace with new heater valve
It's just on the top back side of the engine, to the left of the air filter assembly. You need to pull the engine forward a bit to get at the bolts though since it's just under the windshield (almost no hand access).
Where is the EGR unit located on a 2001 Chevy Impala? picture please
No tools required pull valve from valve cover, pull valve from vacuum line, install new valve.
Its on the upper engine in front of the valve cover
there should be a bleed valve towards the bottom of the rad. It will look like a " T : .