answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2006-02-03 13:15:23

There is no Intake Air Temperature sensor on a 1995 only 96 and newer. If you are asking because you are putting some sort of performance module on it then you need to hook that up to the Coolant temperature sensor which is located next to the thermostat and it is a two wire sensor.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


The intake temperature sensor is located on the side of the air filter case on a 2003 Chevy Silverado 4.3 1500. It is on the top of the engine.


It is located on the intake manifold near the thermostat housing.


The Intake Air Temperature Sensor is loctaed in the side of the Air Filter Case, look for a wired connector attached to it.


The Intake Air Temperature (IAT) sensor (GM part# 12160244) is in the Air Intake Duct, between the Throttle Body and the Mass Air Flow (MAF) Sensor.....



Where is radiator temperature sensor located on a 1997 2.4L Chevy cavalier


The coolant fan sensor is the same as the sensor that shows the coolant temperature on the dash gauge. It is located on the intake manifold.


The 1994 Chevy 454 cubic inch big block engine temperature sensor is located on the front of the engine. The engine temperature sensor will be a few inches above the thermostat housing.



the sensor is located right behind the thermostat housing on your intake manifold on the drivers sided toward the front of the car.


The 1992 Chevy 3500 temperature sensor is located on the front of the engine. The temperature sensor will be in the vicinity of the thermostat housing.


It should be in the intake manifold directly underneath the throttle body.


Where is the temperature cooling sensor located


if its a305,or 350 it is located intake by the thermostat housing.or in the t-stat housing


where is the temperture sensor located on a 2002 chevy trailblazer with a 4200 motor




There is 2 of them and they are underneath the intake manifold. You will have to remove the intake to get to them.


The knock sensor is located on top of the block in a 4.8 2002 engine. The intake will have to be removed to get to the sensor.


the air intake temp sensor is incorporated in with your mass air sensor , it should be located in the upper center /it looks like a little plastic tear drop. hop thi helps!



There are 2 of them, Thay are under the intake manifold. You will have to remove the intake to get to them.


There is two of them. They are located under the intake manifold. There is two of them. They are located under the intake manifold.


the intake air temp sensor, goes in hose from air cleaner to throttle body!! disconnect electrical connector at sensor, then pull sensor from hose.


the temp sensor is located on the right side of the engine under the intake manifold on the engine block. Easiest access is from underneath. Location on engine: no special tools is need it to remove it



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.